Where Does Peloton Bike Plug In?

As an Amazon Associate, I earn from qualifying purchases.

Where Does Peloton Bike Plug In?

Where Does Peloton Bike Plug In? The Peloton Bike plugs into a standard three-pronged wall outlet (120V grounded, U.S.) via a 10-foot power adapter; the DC cable connects to the power jack at the rear stabilizer base (often under a rubber grommet).

Peloton Bike No Power Troubleshooting

support.onepeloton.com

Peloton Bike+ No Power Troubleshooting

support.onepeloton.com

Setting up your new Peloton Bike+

onepeloton.com

Power Connection Location

The power jack sits on the bike frame’s rear.

  • Original Bike: Center of rear stabilizer; small port under rubber grommet.
  • Bike+: Similar rear base location; some models feature USB-C bypass.

Connector hidden—kneel behind bike to spot.

Peloton includes 10-foot adapter for flexible placement.

See Peloton Placement Guide.

Peloton Bike+ No Power Troubleshooting

support.onepeloton.com

Peloton Bike+ No Power Troubleshooting

support.onepeloton.com

Electrical Requirements

Peloton Bikes use minimal power.

ModelVoltageAmps MaxWattage (Avg)Outlet Type
Original Bike100-240V3.25-4.17~50WStandard grounded
Bike+100-240V3.25~50WStandard grounded

Annual cost: ~$5-10 (4 hours/week, average U.S. rates).

No dedicated circuit needed—unlike Tread+ (15A).

Setup Steps

  1. Locate rear jack; remove grommet if present.
  2. Connect DC cable from adapter brick.
  3. Plug three-prong AC end into wall.
  4. Check green LED on brick.
  5. Power on touchscreen (rear button).

Route cable safely—avoid under bike to prevent sweat damage.

For troubleshooting, visit Peloton Bike No Power Guide.

Peloton Bike+ No Power Troubleshooting

support.onepeloton.com

Amazon.com: VHBW 12V 4.17A Power Cord Replacement Compatible with ...

amazon.com

Extension Cords and Tips

  • Use heavy-duty extension if needed (Peloton-approved).
  • Avoid running cable under bike.
  • Surge protector recommended.
  • International: Compatible 100-240V; adapter plug may vary.

FAQ

Where is the Peloton Bike power jack? Rear stabilizer center, under rubber cover.

Does Peloton Bike need special outlet? No—standard three-prong grounded (U.S.).

Can I use extension cord? Yes—10-foot adapter often sufficient; heavy-duty preferred.

How much electricity does it use? ~50W average; low cost annually.

Bike+ power connection different? Similar rear port; some USB-C options.

Final Thoughts

Peloton Bikes plug easily into standard outlets with included long adapter—jack hidden at rear base. Proper connection ensures reliable touchscreen/classes; follow safety routing for longevity. Simple setup empowers seamless home workouts.

Peloton Bike No Power Troubleshooting

support.onepeloton.com

Peloton Bike+ No Power Troubleshooting

support.onepeloton.com

About Author

We will be happy to hear your thoughts

Leave a reply

Bike Marts
Logo
Enable registration in settings - general